If the key is attached with metal key chain, it will hinder the signal
transmission between key and switch to cause engine start failure.
●Horn
When the key is on running position, press the horn switch and the
horn will ring.
●Work lamp/front lamp switch
When the key is on running position, press the work lamp/
front lamp switch, the work lamp/front lamp will be turned
on.
●Gauge
◆Charging indication
When charging system failure occur during engine running, the
charging indication light will be turned on. When engine is stopped,
put the key to running position the light will be turned on, and will
go off after engine is started.
◆Engine oil pressure
When lubricating system failure occur during engine running, the
engine oil pressure indication light will be turned on. When engine
To Next Page
Loading...
