is stopped, put the key to running position the light will be turned
on, and will go off after engine is started. If the light is still on after
engine is started, please stop engine and check engine oil level.
◆Hour meter
Indicate machine’s accumulate running hours.
Hour meter’s count method: the number will increase 1 every one
hour, this is electrical hour meter, so as long as the key is on running
position, the meter still counts even the engine is stopped.
Sometimes there might be fog inside hour meter, this is not failure
and the fog will disappear after steam evaporation
◆Water temperature
When water temperature in cooling system reach to 102℃ during
engine running, water temperature indication light will be turned
on for warning. put the key to running position the light will be
turned on, when engine is running it will display water temperature
◆Battery indication
Battery indication light will be turned on after battery charging is
finished. Put the key to running position the light will be turned on
◆Work lamp/front lamp indication
Put the key to running position and press work lamp/front lamp
switch，the indication light will be turned on.
To Next Page
Loading...
