Wolf CGB-2 Series - Module Functions and Menu Structures

3064810_201804 35
19.AMdisplaymodule
AMoverview
Operatingmode
Heatingmode
Burnerstatus
ON
Status
Status display
Rotary selector with
pushbutton function
Quick start keys
Key1
Key2
Key3
Key4
Burner ON
Boiler pump ON
Boiler in heating mode
Note:
IfyourWolfboilerisnotequippedwithanAMdisplaymodule,ignore
thispage.
Furtherfunctionsanddescriptionscanbefoundintheinstallation
instructionsforcontractorsortheuseroperatinginstructionsforthe
AMdisplaymodule.
Set boiler temperature
(ifBM-2usedasremotecontrol–nofunction)
Set DHW temperature
(ifBM-2asremotecontrol–nofunction)
Enableemissionstestmode
(foruegasinspectoronly)
Acknowledgefault/End/Back
Key1
Key2
Key3
Key4