16
Negative/APS
Negative:
1. Put Negative Adapter (#2) Insert into Titan.
2. Feed negative film and check the image
from the viewer and adjust position
accordingly.
APS:
1. Place Slide Insert (#5) in Slide Adapter (#1).
2. Insert the Adapter into Titan.
3. Feed APS film and check the image from the viewer and adjust
position accordingly.
Note:
You can go to YOUTUBE
(www.youtube.com/watch?v=MniXz1VvoYc) to watch the video
on how to get your negatives out of an APS cassette.
2
17
At Convert Mode, press OK/Enter key to change EV (Exposure
Value), R (red), G (green), and B (blue) color components. The
default value of EV is 0.0, change to positive(+) to make image
brighter, or negative(-) to make image darker.
11. Change Image EV (Exposure Value) and RGB Color
At Convert Mode, press Mirror key to mirror the image left to
right, or Flip key to flip the image upside down.
10. Edit Image Orientation
8mm/Super 8:
Insert the film with perforated holes on the right
side. Go to www.wolverinedata.com/support to
watch the video of Converting Super 8 Movies
into Digital.
To Next Page
Loading...
Need help?
General
