1
12
7. Select Film Adapter or/and Place Insert
Use proper Adapter or/and Insert to convert your film, refer to
Film
Type/Film Adapter/Insert Table
on page 13.
Flip open the proper Adapter then place the Insert into the middle of
window opening, align the 4 dimples underneath (see page 12). Snap
close all 3 catches along the bottom edge tightly to avoid
jamming
when pushing adapter into the F2D Titan.
Negative Adapter
Flip open
Film Adapter
2
Warning:
Using wrong
Film Adapter or/and Insert
will result
cropped or
black areas on images.
Place Insert into the middle
of window opening
110 INSERT
4
To Next Page
Loading...
Need help?
General
