2. Intr oduction of Rapport337
7
FEATURES
As a handy and portable device designed for testing various appliances, for
the image-output equipments to be installed, Rapport337 is an efficient
tester with useful testing functions, to assist the installation of CCTV, UTP
test, communications test, RS-485 communications inspection, etc.
For testing each function, set up modes and capacities to be tested, using
the key pad located on the front part of Rapport337.
Main Functions of RAPPORT337
Video tester ඖ The video signal and the quality of picture
can be tested, and brightness, color and
focus can also be adjusted while the image
is being watched.
ඖ Video signal generator mode : lt outputs color
bar Red, Blue and Green screen to allow
technician to inspect video monitor or DVR.
Support both PAL & NTSC video signal format.
Multimeter ඖ Voltage, current, resistance, short-test can be
tested.
PTZ Controller ඖ The basic operational test of PTZ, and other
tests of focus and image checkup, etc. that
are needed for the installation of PTZ are
possible.
It supports RS-485/422 communications
mode.
UPT Cable tester ඖ
The wiring condition(disconnected, shorted)
of UTP cable can be checked out.
To Next Page
Loading...