22
ඝ DIGITAL MULTI METER
Voltage, current, resistance, continuity can be tested.
W A R N I N G
To prevent an electric shock, injury or damage to RAPPORT337, cut
off the power supply of the circuit, and discharge all the high-voltage
capacity before testing resistance and continuity.
When applying the meter function by using your RAPPORT337, make
sure to turn on its power and set up the proper mode before
connecting the test lead set to the circuit to be tested.
㯲SETUP of KEY SELECT
First, press button, and then press button to be changed to
OHM/BUZZ
First, press button, and then press button to be changed to
ACV/DCV.
This button is used to test current below 4mA.
This button is used to test current below 400mA.
This button is used to test current below 10A.
To Next Page
Loading...