20
OSD Screen Setup
VIDEO : Indicates that the system is in video test mode.
NTSC : Indicates if input or output video signal system is NTSC or
PAL. Input video signal is output on LCD screen by automatic
checking without a special setup key, and output video signal
system in Pattern Generator mode can be switched to NTSC or
PAL, using or key.
B[][][][] : Indicates screen brightness, and the brightness increases
gradually by +1 when key is pressed, and decreases
gradually by -1 when key is pressed. And it returns to the
initial setup value when one of the two keys is pressed for more
than 3 sec.
C [][][][] : Indicates screen sharpness, and the brightness increases
gradually by +1 when key is pressed, and decreases
gradually by -1 when key is pressed. And it returns to the
initial setup value when one of the two keys is pressed for more
than 3 sec.
To Next Page
Loading...