Wood-mizer BMS25 - Page 31

Grinding Wheel Shape
WM doc 1/20/21 4-6
4
e. Turn the grinder motor switch to the "off" position.
The shape of the wheel will be refined after the sharpener has been adjusted to grind the
blade.
The shape at which you have dressed the wheel must be maintained. It is especially
important to maintain the small radius on the left corner of the wheel. This is the section
FIG. 4-5
FIG. 4-6
Dress the right 1/3
of the tooth at the same
angle as the back of the tooth.
SM0028D