To Next PageTo Next PageWhat to do if Wood-mizer LT30HD Super Remote makes wavy cuts?
If your Wood-mizer Saw is making wavy cuts, try slowing the feed rate. Resharpen the blade, ensuring you consult the Sharpener Manual. Adjust the blade guides, use water lube to address sap buildup, and resharpen and reset the blade to correct tooth set issues.
How to prevent Wood-mizer LT30HD Super Remote blades from dulling quickly?
To prevent Wood-mizer Saw blades from dulling quickly, ensure you clean or debark logs, especially on the entry side of the cut. If grinding teeth, grind just enough metal to restore sharpness and use water/coolant. Also, ensure proper sharpening techniques are used.
Why do drive belts wear prematurely on Wood-mizer LT30HD Super Remote?
If the drive belts on your Wood-mizer Saw wear prematurely, align the pulleys if the engine/motor and drive pulleys are out of alignment. See Section 4.6 for instructions.
What to do if blade does not track right on Wood-mizer LT30HD Super Remote Saw?
If the blade on your Wood-mizer Saw does not track right, readjust on the Drive Wheel if the cant adjustment is incorrect. Replace B-57 belts if flat or worn belts are the cause.
General| Brand | Wood-mizer |
|---|---|
| Model | LT30HD Super Remote |
| Category | Saw |
| Language | English |
