www.WoodMaxx.com
22
ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
Grease all zerk ttings on the backhoe at this
time. See page 31 in the manual for grease
tting locations. Check and ll the hydraulic
reservoir. When operating the backhoe for the
rst couple of times you may notice a bit of
lag, this is caused by air that is trapped in the
system, but this will work itself out over a short
period of time. Simply letting the backhoe sit
overnight will allow the bubbles to dissipate
out of the oil in the system. See “Testing
Backhoe Hydraulic System” on page 32.
Read and understand all operation and safety
information provide in the manual and on the
safety labels located on the backhoe before
attempting to operate the backhoe. Do not
allow children or untrained personnel to
operate the backhoe.
Assembly Instructions (continued)
We recommend retaining the
shipping crate for at least 30 days
in the event the backhoe needs to
be returned for any reason.
OIL CHART
ISO SAE GRADE AIR OPERATING
GRADE EQUIVALENT TEMPERATURE TEMPERATURE
32 10W 30° - 80° F 25° - 145 ° F
46 20 40° - 100° F 30° - 160° F
68 20W 50° - 100° F 35° - 185° F
ISO 46 (also referred to as AW 46) is a good all around grade
of hydraulic oil suitable for most situations.
To Next Page
Loading...