Woods DS8.50 - Page 51

Parts 51
MAN1168 (5/27/2016)
DS8.50 / DS10.50 MOUNTED CUTTER ASSEMBLY
REF PART QTY DESCRIPTION
1 1021350 1 A-Frame assembly
2 1042244 2 Break link
3 1042287 2 Lift arm (DS8.50)
-or-
3 1042243 2 Lift arm (DS10.50)
4 39071 1 Sleeve, .781 x 1.38 x 2.40
5 7176 1 Sleeve, 1-3/8 x 1-3/4 x 1-1/4
6 66661 2 Sleeve, 5/8 x 1 x 1-1/4
7 12313 2 Sleeve, 5/8 x 1 x 13/16
8 39065 1 Top link pin
9 39064 2 Lower hitch pin
10 1042761 1 540 RPM Drive (DS8.50) (See page 60)
10 1042762 1
1000 RPM Drive (DS8.50Q) (See page 60)
10 57419 1 540 RPM Drive (DS10.50) (See page 61)
10 57290 1 1000 RPM Drive (DS10.50Q) (See page 61)
11 ------- 1 Tailwheel assembly (See page 64)
12 54315 2 1/2 NPTM x 9/16 JICM Adapter
13 1038891 2 1/4 NPTF x 1/2 NPTM Adapter rstr .06
14 66511 2 1/2 NPT Male coupler
15 1038123 2 Hose, 154" x 1/4 NPT x 9/16 JICF 90°
16 27542
* 3 7/16 x 11/32 Klik pin
17 692
* 5/8 Flat washer
18 5836
* 5/8 NC x 2-1/2 Carriage bolt, GR5
19 34473
* 5/8 NC x 3 HHCS, GR5
20 19025
* 5/8 NC Flanged lock nut
21 12558
* 3/4 NC x 4-1/2 HHCS, GR5
22 2371
* 3/4 NC Hex lock nut
23 34279 1" NC Hex lock nut
24 1863
* 1" Standard flat washer
HHCS Hex Head Cap Screw
* Standard hardware, obtain locally
REF PART QTY DESCRIPTION
(Rev. 7/12/2016)