Need help?Do you have a question about the Woods HSS72 and is the answer not in the manual?
General| Brand | Woods |
|---|---|
| Model | HSS72 |
| Category | Farm Equipment |
| Language | English |
Emphasizes reading manuals and following safety rules.
Ensures proper hardware, clothing, and attachment readiness.
Guidelines for safe operation, including bystanders and hazards.
Procedures and precautions for maintaining the equipment safely.
Instructions for safely storing the rotary cutter.
Locates and identifies the serial number plate on the equipment.
Warns about hazards from blades and thrown objects.
Alerts to severe danger from rotating driveline contact.
Highlights risks of crushing and pinching during operation.
Provides crucial safety precautions to prevent severe harm.
Addresses the danger of falling from the tractor and being run over.
Details risks associated with raised equipment falling and crushing.
Advises against exceeding the 540 RPM PTO speed limit.
Ensures proper tractor stability with attached equipment.
Step-by-step guide for connecting the cutter to the tractor.
Guidance on adjusting the cutter for effective material shredding.
Instructions for setting the appropriate cutting height.
Details on adjusting the top link for proper cutter alignment.
Best practices for operating the cutter efficiently and safely.
Instructions for safely storing the rotary cutter when not in use.
Ensures the cutter is ready for safe operation before use.
Details on lubrication points, frequency, and grease types.
Procedures for safely blocking the cutter for maintenance.
Instructions for blade removal, installation, and sharpening.
Guide to lubricating the driveline slip joint and PTO shaft.
Guidance on sharpening blades while maintaining balance.
Procedure for adjusting the slip clutch for gearbox protection.
Instructions for replacing the shear bolt in the driveline.
Guidance on inspecting and repairing safety shields.
Instructions for cleaning the cutter after use and for storage.
Covers gearbox lubrication, seal replacement, vertical/horizontal repair, and disassembly.
Procedures for removing and installing the crossbar assembly.
Instructions for disassembling and assembling universal joints.
Guidelines for dealers to properly assemble and prepare the cutter.
Steps for assembling the cutter, including shipping unit, A-frame, and tailwheel.
Guides for installing drivelines and protective shields.
Procedures for installing optional chain and rubber shielding.
Checklist for dealers to ensure proper assembly before delivery.
Procedures for inspecting the unit with the customer at delivery.
To Next Page