Woods MDX14 - Setup Dehumidifier for Installation; Selecting an Optimal Location

GB
10
Operating Instructions
2. Installation
BEFORE FIRST USE
Let the machine stand for 4 hours before use
Selecting a Location
Important
1. The dehumidier must be operated in an
enclosed area to be most eective. Close all
doors, windows, and other outside openings
to the room. The eectiveness of the
dehumidier depends on the rate at which
humid air enters the room.
2. Place dehumidier in a location that does
not restrict airow through the front of the
unit.
3. A dehumidier operating in a room will
have little or no eect in drying an adjacent
enclosed storage area, such as a closet, unless
there is adequate circulation of air in and out
of the area. lt may be necessary to install a
second dehumidier in the enclosed area for
satisfactory drying.
4. Ensure that the unit is placed on a stable
and at surface. If the surface is not stable
there is a risk of excessive vibration and that
water to leak.
5. There should be a minimum of 30 cm clear
around the unit.
SET UP DEHUMIDIFIER FOR INSTALLATION
IMPORTANT: