Need help?Do you have a question about the Woodward LS 4 and is the answer not in the manual?
General| Operating Temperature | -40°C to +70°C |
|---|---|
| Storage Temperature | -40°C to +85°C |
| Power Supply | 24V DC |
| Input Voltage Range | 18-32 VDC |
| Communication Interface | CAN |
| Output Type | Analog |
| Power Consumption | 10 W (typical) |
Describes the LS 4 device's capabilities and intended use.
Details safety measures for handling sensitive electronic components.
Provides instructions and cautions for installing the device.
Illustrates the electrical connections for the LS 4 unit.
Details power input and voltage sensing configuration for System A.
Explains voltage input for System B and current input for System A.
Describes input logic, output configurations, and terminal functions.
Covers connection details for interfaces and CAN bus topology.
Lists measured values and core device capabilities.
Details protective features and operational control capabilities.
Explains power factor concepts and synchronization procedures.
Introduces front panel elements like LEDs, buttons, and the display.
Outlines methods for accessing and navigating configuration menus.
Covers voltage, current, frequency, and system settings.
Provides practical examples for various system setups.
Details configuration for voltage, frequency, and phase monitoring.
Explains how to configure and assign relay outputs to functions.
Covers configuration of CAN bus IDs and interface settings.
Step-by-step guide for putting the LS 4 into service and testing.
Lists detailed electrical, environmental, and mechanical specifications.
Explains data telegrams, IDs, and bus communication.
A comprehensive overview of all configurable device parameters.
Information on obtaining technical support, repairs, and training.
To Next Page