Need help?Do you have a question about the Woodward UG-25+ and is the answer not in the manual?
General| Brand | Woodward |
|---|---|
| Model | UG-25+ |
| Category | Controller |
| Language | English |
Guidance on installing and using the UG-25+ actuator in a new or existing system.
Overview of the UG-25+ actuator as a microprocessor-controlled hydraulic actuator.
Key functionalities and characteristics of the UG-25+ actuator's terminal shaft positioning.
Available electrical inputs and outputs for the UG-25+ actuator, including power and status signals.
Overview of mechanical installation requirements for the UG-25+ actuator.
Procedures and checks required before the UG-25+ actuator is put into initial operation.
Correct orientation and procedure for setting the actuator's drive shaft rotation.
Information and recommendations for selecting and maintaining the correct actuator oil.
Overview of electrical installation procedures and best practices for the UG-25+ actuator.
Requirements for electrically bonding the UG-25+ actuator housing to earth ground for safety.
Guidelines for using and terminating shielded cables for EMI protection with the UG-25+.
Procedures and specifications for making proper electrical connections to the UG-25+ actuator.
Basic functional description of the UG-25+ actuator and its interface.
Detailed explanation of how the UG-25+ actuator functions internally.
How the UG-25+ actuator detects and signals shutdown conditions.
Overview of common application failures and troubleshooting tests for the UG-25+ actuator.
Steps to check before contacting Woodward for technical assistance.
Available resources and contacts for troubleshooting and support of Woodward products.
Factory-offered services for maintaining and repairing Woodward products.
Procedures for returning the UG-25+ for service and required packing guidelines.
To Next Page