Need help?Do you have a question about the Woodward UG40 and is the answer not in the manual?
General| Number of Analog Inputs | 4 |
|---|---|
| Actuator Type | Hydraulic or Electric |
| Input Voltage | 18-32 VDC |
| Communication Protocols | Modbus RTU, CAN |
| Operating Temperature | -40°C to +70°C |
| Dimensions | Approximately 165 x 110 x 55 mm (6.5 x 4.3 x 2.2 inches) |
Explains the required direction of rotation for the drive shaft and potential issues.
Covers ensuring smooth operation and proper fit of the drive shaft connection to the engine.
Discusses linkage adjustments for terminal shaft travel, overtravel, and fuel settings.
Guides on selecting suitable oil based on operating temperature and compatibility.
Details procedures for maintaining actuator oil, including checking condition and replacement.
Outlines the procedure for putting a new or repaired UG40 Actuator into service.
Describes the actuator's behavior and safety feature upon loss of control voltage.
Describes the premium program for receiving a like-new replacement unit quickly.
Lists information needed for obtaining technical assistance via telephone.
To Next Page
