Need help?Do you have a question about the Woodward MicroNet Simplex and is the answer not in the manual?
General| Model | MicroNet Simplex |
|---|---|
| Type | Controller |
| Input Voltage | 24 VDC |
| Display | LCD |
| Communication Ports | RS-232, RS-485, Ethernet |
| Power Supply | 24 VDC |
| Communication Protocol | Ethernet, Modbus |
| I/O Configuration | Configurable I/O |
| Operating Temperature | -40°C to 70°C |
| Weight | Varies by configuration |
Safety guidelines for installation, operation, and authorized equipment use.
Precautions to prevent damage to static-sensitive electronic parts.
Critical safety warnings for overspeed, overtemperature, explosion hazards, and PPE.
Operational constraints and requirements for safe installation and use.
EMC and Low Voltage Directives for CE marking and related installation requirements.
CSA listing and ABS rules for marine applications and other standards.
Safety Integrity Level information reference.
Overview of MicroNet Plus/Simplex controllers and their applications.
Details redundant configurations, CPU theory, and failover.
Steps for starting and operating redundant systems and failover causes.
Overview of simplex chassis, CPU options, and I/O.
Configuration for simplex operation and module replacement procedures.
Discusses undetected faults in redundant systems.
Details simplex chassis, CPU options, and system expansion.
Describes CPU5200, Pentium, and Motorola 68040 module capabilities.
Configuration for simplex operation and module replacement.
Discusses undetected faults in simplex systems.
Features, specifications, and components of the 14-slot chassis.
Features, specifications, and components of the 8-slot chassis.
Description and specification of the 6-slot simplex chassis.
Description and specification of the 12-slot simplex chassis.
Module description, outputs, and LEDs for Plus chassis power supplies.
Details operating range, voltage, current, and holdup for PS.
Diagnosing issues using LED indicators and checks.
Module description and specs for simplex expansion PS.
Input power wiring, installation, and system power-up procedure.
LED descriptions and troubleshooting for power supplies.
Discusses network setups and recommended configurations for CPUs.
Description, peripherals, and ratings of the P1020 CPU module.
Hardware configuration using DIP switches for CPU and RTN modes.
Explains the meaning of various LEDs on the CPU module.
Information on CAN ports, specifications, and interface.
Description of the CPU5200 module, its peripherals, and ratings.
Details the CPU5200 processor, memory, and communication features.
Description of the RTN module for expansion chassis communication.
How to configure expansion racks with RTN modules.
Explains the meaning of LED indicators on the RTN module.
Description of the Serial In/Out module and its ports.
Installation of SIO module and termination requirements.
Proper grounding and shielding practices for serial communication.
Steps for troubleshooting the SIO module.
Overview of discrete I/O modules.
Description, installation, and troubleshooting for HDDIO module.
Description, installation, and troubleshooting for 48Ch DI module.
Description, installation, and troubleshooting for 64Ch DO module.
Overview of analog I/O modules, single and combination types.
Overview of 8-channel current input modules.
Description, installation, and troubleshooting for Speed Sensor module.
Description, installation, and troubleshooting for 24/8 Analog module.
Description, installation, and troubleshooting for Speed/Analog IO Combo module.
Summary of changes made in different revisions of the manual.
To Next Page