Manual 26166V1 MicroNet Simplex & MicroNet Plus
Woodward 127
Revision History
Changes in Revision T—
IMPORTANT box – EMC Compliance added to Regulatory Compliance Section
Det Norske Veritas replaced by DNV/GL in Regulatory Compliance Section
Warning box added to Special Conditions for Safe Use section.
IMPORTANT box added to section 6.1.6
Note added to Chapter 7 beneath Figure 7-6
Changes in Revision R—
Ethernet specification added to Table 6-5
1 Mbps Specification added to Tables 6-6 and 7-2
Notes added to Section 7.1.6
Note added to section 9.28.1
IMPORTANT box added to sections 9.28.3 and 9.29.4
Note added to section 9.29.1
Changes in Revision P—
Chapter 6 CPU P1020 section 6.1 added
Section 9.28 added Readback Accuracy Source and Return to 4-20mA Output Ratings
• Section 9.29 added Readback Accuracy Source and Return to 4-20mA Output Ratings
Section 9.29 added Note following 4-20mA Output Ratings
Added 1 Mbps CAN Network Trunk Line Specifications to Table 6-6.
Moved Section 6.3 through 6.6 information to Volume 3
Moved Section 7.2 through 7.5 information to Volume 3
Moved Section 8.3 and 8.5 information to Volume 3
Moved Section 9.3 through 9.26 information to Volume 3
Changes in Revision N—
Replaced Proximity Sensor with Eddy Sensor in Chapter 9
Updated Appendix A
Removed Appendix F and created note in Regulatory and Compliance section regarding SIL
Certification information.
Changes in Revision M—
Updated front panel indicator tables and related information as marked with change bars.
Sigificant updates to Section 9.27 with changes marked by change bars.
Sigificant updates to Section 9.28 with changes marked by change bars.
Four new modules specifications 5466-5000, 5466-5001, 5466-5026, and 5466-5027 added to the
table in Appendix A.
Changes in Revision L—
Updated compliance and technical information.
Chapters 10–16 and the appendixes are contained in volume 2.