Woodward MicroNet Simplex - Figure 4-3. Outline Drawing of Micronet Plus Chassis

Manual 26166V1 MicroNet Simplex & MicroNet Plus
Woodward 30
Chassis Outline Drawing
The MicroNet Plus 14-slot chassis is physically the same dimensions as the current MicroNet Simplex 12-
slot chassis.
NOTES:
 Add ~2” (~5 cm) to the depth dimension to account for the cable saddles that are not shown on the
outline drawing below.
 The PE ground connection point is located underneath the left side of the chassis.
 To ensure compliance with the EMC certification, all chassis mounting screws (#8-32 M4) should be
installed to properly ground the chassis to the mounting plate.
 For proper airflow, the installation should allow a 3” (8 cm) air gap above and below the chassis.
Figure 4-3. Outline Drawing of MicroNet Plus Chassis
Released