Woodward MicroNet Simplex - Chapter 9. Analog I;O Modules; 9.1 Introduction and Module Types; 9.7 Current Input Modules

Manual 26166V1 MicroNet Simplex & MicroNet Plus
Woodward 103
Chapter 9.
Analog I/O Modules
9.1—Introduction
This chapter contains information on those modules that are classified as analog I/O modules. There are
two types of analog I/O modules. There are the single function type modules and the combination
modules. The combination modules consist of more than one type of input or output. The single type
modules consist of a single type of I/O, such as all 4-20 mA inputs.
9.2— Combination I/O Modules
There are four Analog Combination I/O modules available from Woodward. These are described in
sections 9.3 through 9.6 and 9.28
9.3—24/8 Analog Module
Module Obsolete. See Volume 3, Section 5 for information.
9.4—Dataforth 24/8 Analog Module
Module Obsolete. See Volume 3, Section 5 for information.
9.5—Analog Combo Module
Module Obsolete. See Volume 3, Section 5 for information.
9.6—34Ch High Density Versatile Input Module (HDVIM)
Module Obsolete. See Volume 3, Section 5 for information.
9.7—Current Input Modules
9.8—8Ch Current Input (4-20 mA) Module
Module Obsolete. See Volume 3, Section 5 for information.
9.9—Non-Standard 8Ch Current Input (4-20 mA) Module
Module Obsolete. See Volume 3, Section 5 for information.
9.10—Voltage Input Module
Module Obsolete. See Volume 3, Section 5 for information.
9.11—8 Channel Voltage Input (0-10 Vdc) Module
Module Obsolete. See Volume 3, Section 5 for information.
Released