Manual 26166V1 MicroNet Simplex & MicroNet Plus
Woodward 54
Figure 6-2. Simple Un-Teamed NIC Setup
Note: A teamed network can be a part of an industrial control system and play an important part in load
balancing and failover as a complete system. However, NO DIRECT CONNECTION to a MicroNet Plus
CPU by a teamed NIC IP address should be part of the network configuration. The workstation with un-
teamed NIC would become the connection to the MicroNet CPU for the Modbus data as well as the OPC
data. Other computers on the network can access this data through DCOM (in the case of OPC) or
additional Modbus server functionality.
To Next Page
Loading...
