EasyManua.ls Logo

Woom UP - 6 Getting the Woom up Ready; Unpacking

Woom UP
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
6 Getting the woom UP ready
Please note: The designations left and right in these instructions always refer to the left or
right side of the bike as seen from above and in the direction of travel.
6�1 Unpacking
4. Remove packaging, carefully cut through cable ties.
CAUTION
When cutting the cable ties, make sure that you do not damage the bike parts, es-
pecially the tyres.
5. Remove the plastic protective disc from the rear derailleur.
6. You should write down the woom UP frame number. This number uniquely iden-
ties the bike and is important in the event of theft and insurance matters. The
number can be found at the back of the seat tube (see gure). You can also write
down the frame number in your warranty card – see cover sheet.

Related product manuals