16
Fault finding
Greenstar CDi Compact
ErP
- 6 720 813 277 (2014/09)
7.1 Boiler alert state
In the event of an alert, a fault code and an alert symbol will be displayed on the boiler display, and the blue operation/fault
light will flash, e.g. EA, reset your boiler.
7.2 Boiler reset
1. To reset the boiler, press .
2. “Reset” and are briefly displayed.
▶ If the reset was successful the boiler will return to normal operation.
▶ If the reset was not successful then the alert code will be displayed again, and the blue operation/fault light will continue to flash.
Due to the internal safety systems of your Greenstar CDi
Compact
ErP
boiler, some codes cannot be cleared by a simple reset. Please
contact Worcester, Bosch Group for further assistance.
When calling Worcester, Bosch Group about a fault, it will be useful to quote the alert code and three digit number under the alert
code, e.g. EA and 227. If there is a fault that cannot be reset by you, the user, then a service engineer visit will be necessary.
max
min
2
3
1
04
bar
To Next Page
Loading...
Need help?
General