Workwell uAttend CB6000 - Using the Keypad; Keypad Functionality Overview

QUESTIONS? Call 1-888-287-2144 or Email support@canadianme.com
KEY FUNCTION
1–0 Digits funcon as numbers for performing funcons such as entering a PIN.
MENU Pressing the MENU key prompts a login screen for two levels of me clock access:
Administrator and Super User.
Administrator: The default password is 53178. Administrators can access Admin menu to
perform all available funcons.
Super User: The default password is 6318. Super Users can access System Management.
The administrator has the power to change all default passwords.
ESC/B-L Pressing the ESC/B-L key in standby mode enables selecng the Break Punch or Lunch
Punch funcon. In all other modes, this key is used to exit from a menu or cancel a
funcon.
DT-JT/ UP
ARROW
Pressing the up arrow/DT-JT key in standby mode enables selecng the Department
Transfer or Job Tracking funcon. In all other modes, this key is used to scroll up.
USING YOUR KEYPAD
The table below explains the funconality of each key on the keypad.
08