Workwell uAttend CB6000 - Character Tables

25
CHARACTER TABLES
To join a WiFi network (CB6500 model only), you will use the numeric keypad to enter
numbers, leers, and symbols for your password. The following tables display the keys
you will use to enter each leer or symbol.
11
Switching To Numbers
To enter numbers press the ESC key once. To return to leers, press the check mark  key unl
the bar at the boom of the screen says “English.”
Entering Symbols
To enter symbols press the check mark  key unl it says “symbol” and enter the appropriate
numerical and key paerns for the symbol desired.
Saving the Password
Once you have added your WiFi password, ensure that you are in number entry mode, then press
OK to enter.
NOTE: To access the number entry mode: From the leer or symbol entry mode, press the
ESC key once.
Your WiFi password will display at the top of the screen and you will be asked to press OK again to
conrm that it is correct. If not, go back.
Press the ESC key unl you are back to the main screen. Your screen will display “System Ready” in
green once your password has authencated.