6.3 Drilling (Fig. 4/Item 1)
For drilling adjust the setting ring for the torque to the last setting “Drill”.
In this drill setting the slip coupling is non-functional. The maximum
torque is available for drilling.
6.4 Changeover switch (Fig. 5/Item 3)
The slide switch above the ON/OFF switch is for setting the direction
of rotation of the cordless screwdriver and for preventing the cordless
screwdriver from being switched on inadvertently. You can select
between clockwise and counter-clockwise rotation. To avoid causing
damage to the gearing, the direction of rotation must only be changed
when the screwdriver is at a standstill. When the slide switch is in the
middle position, the ON/OFF switch is blocked.
6.5 ON/OFF switch (Fig. 5/Item 4)
Infinitely variable speed control is possible with the ON/OFF switch.
The further you push the switch, the higher the speed of the cordless
screwdriver.
4 5
4
1
3
WZAS_14_4_1_Li_UK_SPK7.indb 20 30.07.12 08:50
To Next Page
Loading...
Need help?
General
