7
Information
Cleaning, maintenance and ordering of spare parts
Always pull out the power plug before starting any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor housing free of dirt
and dust as far as possible. Wipe the equipment with a clean cloth or
blow it down with compressed air at low pressure.
• We recommend that you clean the equipment immediately after you
use it.
• Clean the equipment regularly with a damp cloth and some
soft soap. Do not use cleaning agents or solvents; these may be
aggressive to the plastic parts in the equipment. Ensure that no water
can get into the interior of the equipment.
Maintenance
There are no parts inside the equipment which require additional
maintenance.
Ordering spare parts
Please provide the following information on all orders for spare parts:
• Model/type of the equipment
• Article number of the equipment
• ID number of the equipment
• Spare part number of the required spare part
For our latest prices and information please go to www.isc-gmbh.info
Item Description Replacement part no.
05 Battery 451132601001
06 Battery charger 451319101001
02 Drill chuck 451319101002
04 ON/OFF switch 451319101003
WZAS_14_4_1_Li_UK_SPK7.indb 23 30.07.12 08:50
To Next Page
Loading...
Need help?
General
