Workzone 14.4 V LITHIUM-ION CORDLESS DRILL - Sound and Vibration; Wear Ear-Muffs; Drilling in Metal; Screwing Without Hammer Action

25
AFTER SALES SUPPORT
t
0151 649 1500
(Charged at local rates)
www.einhell.co.uk
D
1890 946 6244
WZAS 14,4/1 Li
XI/18/2012
Sound and vibration
Sound and vibration values were measured in accordance with EN 60745.
L
pA
sound pressure level ................................................................................ 64 dB(A)
K
pA
uncertainty .......................................................................................................... 4 dB
L
WA
sound power level .................................................................................... 75 dB(A)
K
WA
uncertainty ......................................................................................................... 4 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in
accordance with EN 60745.
Drilling in metal
Vibration emission value a
h
= 3.2 m/s
2
K uncertainty = 1.5 m/s
2
Screwing without hammer action
Vibration emission value a
h
≤ 2.5 m/s
2
K uncertainty = 1.5 m/s
2
Additional information for electric power tools
Warning!
The specified vibration value was established in accordance with a
standardized testing method. It may change according to how the
electric equipment is used and may exceed the specified value in
exceptional circumstances.
WZAS_14_4_1_Li_UK_SPK7.indb 25 30.07.12 08:50