To Next Page

To Previous Page

Safety

15. Check the compressor for any damages.

• Before you use the compressor, the protective devices or easily damaged

parts must be carefully checked for functioning properly and as intended.

• Check to make sure that moving parts are fully functional, that they are not

jammed and that the parts are not damaged. All parts must be properly

mounted and fulﬁl conditions to ensure proper operation of the compressor.

• Damaged protective devices and parts must be properly repaired or re-

placed by an authorised workshop to the extent not otherwise speciﬁed

in the user manual.

• Damaged switches must be replaced by a customer service workshop.

• Do not use any compressors if the On/Off switch cannot be turned on and off.

16. ATTENTION!

• For your own safety, only use accessories and auxiliary equipment speciﬁed

in the user manual or recommended or speciﬁed by the manufacturer. Us-

ing ﬁtted tools or accessories other than those speciﬁed in the user manual

or recommended in the catalogue may pose a risk of injury for you.

17. Have your compressor repaired by an electrical technician.

• This compressor complies with applicable safety regulations. Repairs

may only be performed by an electrician who uses original replacement

parts; otherwise, there is a risk of accident for the operator.

18. Protection against noise emissions.

• Wear ear protection when using the compressor.

19. Replacing the mains connection line.

• If the mains connection line is damaged, it must be replaced by the man-

ufacturer or an electrician to avoid risks.

Safety instructions for spray painting

• Do not work with paints or solvents whose ﬂash point is less than 55°C.

• Do not heat up paints and solvents.

• When working with liquids that are harmful to health, you must use ﬁlter

units (face masks). Also be sure to observe all information regarding

protective measures made by the manufacturers of such substances.

• Observe the information and labels in accordance with the Ordinance on

Hazardous Substances provided on the outer packaging of the materials

you are working with. If applicable, you must also take additional protective

measures. This includes in particular wearing suitable clothing and masks.

Workzone GPAC2200 User Manual

Questions and Answers: