Storage
NOTICE!
Risk of damage!
The compressor can be damaged as the result of incorrect or improper storage.
− Before storage, pull the mains plug out of the socket to disconnect the
compressor from the power supply.
− Only store the compressor and all connected pneumatic tools in a vented state.
− Always store the compressor in a dry environment.
− Always store the compressor in a standing position and do not tip it.
− Always store the compressor in a room that is not accessible for children.
− Always store the compressor so that it cannot be operated by unauthor-
ised persons.
1. Pull the mains plug out of the socket to disconnect the compressor from the power
supply.
2. Let the compressor cool off completely.
3. Vent the compressor and all connected pneumatic tools as described in the chap-
ter “Cleaning and maintenance”.
4. Clean the compressor and remove condensed water as described in the chapter
“Cleaning and maintenance”.
5. Store the compressor on a dry, level surface in a dry room.
6. Cover the compressor to protect it from dust or similar if you do not use it for pro-
longed period of time.
To Next Page
Loading...
Need help?
General
