Replacing the mains connection line
WARNING!
Risk of electric shock!
If the mains connection line is damaged or is improperly mounted, there is a
risk of electric shock.
− The mains connection line may only be replaced by the manufacturer, its
After Sales Support or a similarly qualified specialist to avoid risks.
− If the mains connection line is damaged, it must be replaced with a special connec-
tor cable that can be obtained from the manufacturer or its after sales support.
− The mains connection line may only be replaced by a specialist workshop or
qualified specialist personnel.
Checking the compressor
Check the condition of the compressor regularly. Among other things, check to make
sure:
− all switches
3
/
6
are not damaged,
− the overload protection is working properly,
− that the accessories are in proper condition,
− that the mains connection line and the mains plug are not damaged,
− that the vents are unobstructed and clean. If applicable, use a soft brush to clean
them (see section “Cleaning the compressor”).
If you identify a damage, you must have it repaired by a specialist workshop
to prevent risks.
To Next Page
Loading...
