Problem Cause Solution
The compressor is
operating, pressure is
shown on the pressure
gauge, but the tools
don’t work.
The hose connec-
tions have a leak.
− Check the compressed air hose and
all connections with soapy water
and replace them if necessary.
The quick coupling
has a leak.
− Check the quick coupling and if
applicable, replace it.
The pressure on the
pressure regulator
is set too low.
− Open the pressure regulator more.
Ordering spare parts
Contact the manufacturer at the service address specified on the warranty card if you
need spare parts.
Spare part list
Item no. Description Spare part number
4 Air filter 1012004
5 Oil plug 1012005
16 Rubber feet 1012016
17 Wheel 1012017
Technical data
Model: GPAC2200
Nominal voltage: 230–240 V~
Nominal frequency: 50 Hz
Input power: 2.2 kW
Idle speed n
0
: 2850 min
-1
IP code compressor: IP20
IP code motor: IP23
Tank contents: 50 l
Theoretical suction capacity: approx. 412 l/min
Max. operating pressure: 8 bar
Max. setup height (above sea level): 1000 m
Sound power level L
WA
: 96 dB (A)
Uncertainty K
WA
: 3 dB (A)
To Next Page
Loading...
Need help?
General
