Workzone GT1379 - Setting the Overload Warning

20
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT1379
21
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT1379
  Nowconnecttheconsumer/consumers(usingapoweroutlet
strip to the power meter.
  Notethatthetotaloutputoftheconnectedconsumersmust
not exceed 3120 watts.
  Ifrequired,deletethevaluesfortotalconsumption(KWh),total
consumptiontime(TOTALTIME)andtheprice,bypressingand
holding the 3PRICEbutton for 3 seconds.
Operation
Setting the overload warning
 (OVERLOAD)
1. Ifrequired,switchovertothedisplayoftime,
frequency(Hz)andvoltage(V)bypressingthe
2 arrow up button.
  •Thisstepisonlynecessaryif,inthedisplayontheleft,the
time with seconds and days of the week are shown.
2. Pressthe4 SET button once.
  •Thedisplayon the right shows 000 with a flashing W (watts)
and the lettering, OVERLOAD.
Operation