Workzone GT1379 - Overview of the Displays; Field Left Display; Field Right Display

22
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT1379
23
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT1379
3. Pressthe1 arrow up or 2 arrow down button, in order to select
the watts (W) or amperes (A) overload warning.
4. Pressthe4 SET button, in order to reach the entry mode.
  •Thedisplayontheright shows a flashing placeholder for the first
number.
  •Withthepre-selectionforwatts(W),thenumbers1,2or3
can be entered (possible maximum entry is 3999).
  •Withthepre-selectionforamperes(A),onlythenumber1can
be entered (maximum possible entry is 19.99).
5. The setting takes place with the 1 arrow up / 2 arrow down
buttons and by confirming with the 4 SET button.
  •Afterenteringthelastnumber,thesetvalueremainsinthe
display.
NOTE: If the set value is exceeded, OVERLOADflashes in the
display and the OVERLOAD display 5 illuminates red.
Delete the setting by overwriting or by pressing and holding
the 2 arrow down button for 3 seconds.
Operation
Field left
Repeatedlypress arrow up button: Display switches between
time with seconds and time with day of the week.
Field right
Repeatedlypressarrow down button:
Displayofthevoltagenumber(V)andfrequencydisplay(Hz)
in field left.
Display of amperes (A) number. Display of the max. amperes
number (A).
Overview of the displays