What to do if the display is blank on my Workzone DC-1 / 650080 Measuring Instruments?
If the display is blank, it could be due to low voltage or a loose contact. Try changing the battery first. If that doesn't work, check the battery position to ensure proper contact.
Why is the indicator flashing on my Workzone Measuring Instruments?
If the indicator is flashing, it's likely because the voltage is too low. You should change the battery.
What to do if the display is stuck or flickers on Workzone DC-1 / 650080?
If the display is stuck or flickering, there may be a fault in the circuit. To resolve this, take the battery out and wait one minute before putting it back in.
General| Brand | Workzone |
|---|---|
| Model | DC-1 / 650080 |
| Category | Measuring Instruments |
| Language | English |
Important notes regarding repairs, liability, and using approved parts.
Warning about suffocation risk from packaging and small parts for children.
Warning about risks associated with improper battery use.
Warning about poisoning risk from damaged or leaking batteries for children.
Warning about potential injury or chemical burns from damaged or leaky batteries.
Warning about potential injury from touching sharp measuring edges.
To Next Page
