The air pressure gauge monitors the amount of pressure being applied to the item being
inflated.
LED work-lights (Fig. 13)
There is a LED work-light (10) in the front of this air pump. The LED light can light prior to
motor running if you press the ON/OFF switch trigger (9) lightly, which keep the work area
lighted for checking clearly at first and it lights also during operation.
Fig.9
WARNING: Do not stare directly at the light beam. Never aim the beam at any
person or an object other than the work piece.
Do not deliberately aim the beam at personnel and ensure that it is not
directed towards the eye of a person for longer than 0.25s.
Operation
Fig.13
Fig.12
To Next Page
Loading...
