Safety Symbols
Some of these following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and
more safely.
Indicates a potenal personal injury hazard.
To reduce the risk of injury, user must read and understand operator’s manual
before using this product.
Always wear eye protecon with side shields marked to comply with ANSI Z87.1.
Do not expose to rain or use in damp locaons.
To reduce the risk of injury or damage, avoid contact with any hot surface.
Do not operate inator to result in output pressure greater than marked maxi-
mum pressure of aachment. Do not use at pressure greater than 150 PSI.
Voltage
Time
Type or a characterisc of current
Rotaonal speed, at no load
Revoluons, strokes, surface speed, orbits etc., per minute
Safety Symbols
To Next Page
Loading...
Need help?
General
