To Next PageTo Next Page
Need help?Do you have a question about the Workzone WBJ-900 and is the answer not in the manual?
Explanation of warning symbols used in the manual to denote risks and hazards.
Essential safety guidelines to prevent electric shock, fire, and serious injury during operation.
Specific safety precautions for operating the biscuit jointer, including blade handling and workpiece support.
Guidelines for safe use of electrical connections, plugs, and extension cords.
Procedure for correctly replacing a damaged moulded 3-pin mains plug.
Step-by-step guide on how to safely switch the biscuit jointer on and off.
Procedure for marking workpieces to ensure accurate biscuit groove placement.
Guidance on correctly positioning the biscuit jointer relative to the workpiece.
Detailed steps for accurately sawing biscuit grooves in workpieces.
Process for joining workpieces using biscuit dowels after grooves have been cut.
A practical recommendation for an improved method of joining workpieces with biscuit dowels.
Procedure to verify and set the correct cutting depth before starting operation.
Instructions on how to adjust the cutting depth if it is found to be incorrect.
Recommendations for cleaning the machine, including ventilation slots and housing.
Information stating that the machine requires no additional lubrication.
Guidance on how to address and report machine faults or issues.
Information on proper disposal of the product and its packaging according to regulations.
Key technical data, including voltage, power, speed, and dimensions, for the biscuit jointer.
Information on vibration emission levels and how to protect against exposure.
Explanation of warning symbols used in the manual to denote risks and hazards.
Essential safety guidelines to prevent electric shock, fire, and serious injury during operation.
Specific safety precautions for operating the biscuit jointer, including blade handling and workpiece support.
Guidelines for safe use of electrical connections, plugs, and extension cords.
Procedure for correctly replacing a damaged moulded 3-pin mains plug.
Step-by-step guide on how to safely switch the biscuit jointer on and off.
Procedure for marking workpieces to ensure accurate biscuit groove placement.
Guidance on correctly positioning the biscuit jointer relative to the workpiece.
Detailed steps for accurately sawing biscuit grooves in workpieces.
Process for joining workpieces using biscuit dowels after grooves have been cut.
A practical recommendation for an improved method of joining workpieces with biscuit dowels.
Procedure to verify and set the correct cutting depth before starting operation.
Instructions on how to adjust the cutting depth if it is found to be incorrect.
Recommendations for cleaning the machine, including ventilation slots and housing.
Information stating that the machine requires no additional lubrication.
Guidance on how to address and report machine faults or issues.
Information on proper disposal of the product and its packaging according to regulations.
Key technical data, including voltage, power, speed, and dimensions, for the biscuit jointer.
Information on vibration emission levels and how to protect against exposure.
General| Brand | Workzone |
|---|---|
| Model | WBJ-900 |
| Category | Power Tool |
| Language | English |
