hard hat, or hearing protecon must be used for appropriate condions.
• Eye protecon is required to guard against ying fasteners and debris which could cause
severe eye injury.
• Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long
hair can be drawn into air vents.
• Do not use on a ladder or unstable support. Stable foong on a solid surface enables
beer control of the inator in unexpected situaons.
• Do not disassemble the inator.
• Do not operate inator near ammable liquids or in gaseous or explosive atmospheres.
Internal sparks may ignite fumes.
• Do not store your inator in a damp or wet locaon. Do not store in locaons where the
temperature is less than 50°F or more than 100°F. Do not store in outside sheds or in
vehicles.
INFLATOR USE AND CARE
• Check hoses for weak or worn condion before each use, making certain all connecons
are secure. Do not use if defect is found. Purchase a new hose or nofy an authorized
service center for examinaon or repair.
• Release all pressures within the system slowly. Dust and debris may be harmful.
• Do not use inator if switch does not turn it on or o. An inator that cannot be con-
trolled with the switch is dangerous and must be repaired.
• Place the switch o posion before making any adjustments, changing accessories, or
storing the inator. Such prevenve safety measures reduce the risk of starng the ina-
tor accidentally.
• Store idle inators out of reach of children and other untrained persons. Inators are
dangerous in the hands of untrained users.
• Check for misalignment or binding of moving parts, breakage of parts, and any other
condion that may aect the inator’s operaon. If damaged, have the inator serviced
before using. Many accidents are caused by poorly maintained tools.
• Use only accessories that are recommended by the manufacturer for your model. Ac-
cessories that may be suitable for one inator may create a risk of injury when used on
another inator.
• Keep the inator and its handle dry, clean and free from oil and grease. Always use a
clean cloth when cleaning. Never use brake uids, gasoline, petroleum based products, or
any strong solvents to clean your inator. Following this rule will reduce the risk of loss of
control and deterioraon of the enclosure plasc.
Safety Instructions
To Next Page
Loading...
Need help?
General
