SPEED CONTROL
The drone has 3 speed settings. Low, medium and high speed. The drone will always default to low speed
when you first turn it on. Press the SPEED CONTROL button once and you will hear 2 beeps, meaning it is
now on medium speed. Press the SPEED CONTROL button again and you will hear 3 beeps, meaning it is
now on high speed. Press the button again to cycle back to low speed.
FLIP STUNT MODE
Have the drone hover at least 10 feet off the ground. Press the Flip Stunt Button and push the right joystick in the
direction you want the drone to perform a single flip.
RETURN ASSIST
Press the RETURN ASSIST button once while the drone is in flight and the drone will slowly start to fly
toward the pilot. You will still need to guide the drone with the right joysticks left and right movement to avoid
any obstacles.
EASY MODE
Simplifies drone flight use by limiting command directions based on your direction. Use Easy Mode when you
are having difficulty telling which direction the drone is pointing because of distance. Press the Easy Mode
button once to activate it. Press again to deactivate it.
SPEED CONTROL FLIP STUNT MODE
RETURN ASSIST EASY MODE
FLYING THE DRONE CONTINUED
EMERGENCY STOP
SPECIAL ACTIONS
If the drone crashes or to avoid a collision you will
need to do an EMERGENCY STOP.
Push the left joystick to the bottom left and push the
right joystick to the bottom right at the same time and
hold the position until the drone shuts down.
The rotor blades should stop immediately when
performing an EMERGENCY STOP.
WARNING: The drone will fall to the ground if you
perform the EMERGENCY STOP while the drone
is in flight.
To Next Page
Loading...
Need help?
General
