Worx Landroid Owner's Manual

8
EN
You can place the charging station on your lawn or on a hard surface like a walkway, provided that the lawn and the hard surface are at
the same height (no steps).
To enter the station, Landroid needs at least 80cm straight path in front. On the exit side, it needs at least 30cm straight path before a left
turn (fig. 1). If the turn is to the right, there is no need for a straight path (fig. 2).
2.1.3. Charging station checklist:
A . within reach of AC mains
B. in shade
C. straight path on entrance; straight path on exit if necessary
D. flat land
E. no irrigation sprinklers nearby
2.1.4 .Placement of boundary wire on slopes
The upper boundary wire should NOT be placed on slopes steeper than 35% (20°). The lower boundary wire should NOT be
placed on slopes steeper than 17% (10°), and it should be placed at least 40cm away from any obstacle when positioned on a
slope that is 17%.
80cm30cm
1
80cm
2
Upper boundary wire
Lower boundary Wire
Lower boundary
Wire
26cm
17%-35% <17%
40cm
3
4
0°
0°

Worx Landroid Specifications

General

Battery Voltage	20 V
Battery Type	Lithium-ion
Rain Sensor	Yes
App Control	Yes
Cutting Height Range	30-60 mm
Battery Capacity	2.0 Ah
Weight	9 kg
Maximum Incline	35%
Connectivity	Wi-Fi
Blade Type	3 floating blades
Noise Level	Approx. 60-65 dB