To Next PageTo Next Page
Need help?Do you have a question about the Worx WA4301 and is the answer not in the manual?
Align and insert the extension pole handle into the shaft and rotate the Locking Knob clockwise to lock.
Align and insert the extension pole into the saw, hang the buckle on the hook, and press the Clamping Lever to tighten.
Loosen the Clamping Lever to release the buckle and press the Extension Pole Release Button to disconnect.
Attach the pole, install battery, and prepare for cutting high branches, noting falling branch path.
Align and insert the extension pole handle into the shaft and rotate the Locking Knob clockwise to lock.
Align and insert the extension pole into the saw, hang the buckle on the hook, and press the Clamping Lever to tighten.
Loosen the Clamping Lever to release the buckle and press the Extension Pole Release Button to disconnect.
Attach the pole, install battery, and prepare for cutting high branches, noting falling branch path.
General
