What to do if my Worx Saw suddenly stops while I'm using it?
If your Worx Saw suddenly stops during operation, it could be due to several reasons: * Overload * High battery temperature * Low battery capacity To resolve this, immediately relieve the load on the saw and let it cool down for about 30 seconds by running it without any load. Also, ensure you charge the battery pack.
General| Motor type | Brushed |
|---|---|
| Handle type | Top handle |
| Product color | Black, Orange |
| Built-in light | No |
| Orbital action | Yes |
| Bevel adjustment | - |
| Number of speeds | 1 |
| Power source | Battery |
| Battery voltage | 20 V |
| Cutting depth in wood | 100 mm |
| Cutting depth in steel | 76 mm |
| Idle stroke rate (max) | 3000 spm |
Weight and Dimensions| Depth | 165 mm |
|---|---|
| Width | 257 mm |
| Height | 127 mm |
| Weight | 1500 g |
Ensures safe operation by detailing electrical precautions and proper use of cords.
Guidelines for user awareness, protective equipment, and preventing accidental starts.
Instructions on correct tool usage, maintenance, and safe storage practices.
Proper handling, charging, and safety measures for battery packs.
Special safety precautions and additional warnings for using the reciprocating saw function.
Crucial safety instructions for handling, charging, and disposing of battery packs.
Guidance on switching between jigsaw and reciprocating saw modes for optimal cutting.
Instructions for safely replacing the saw blade and tips for effective cutting operations.
Tips for optimal performance, including managing tool heat and cut quality.
To Next Page
