What to do if my Worx Saw won't start?
If the Worx Saw tool does not start when operating the on/off switch, check if the battery park is connected well into a working outlet. Another reason might be worn down carbon brush. In this case replace the carbon brush using a qualified maintenance person.
Why won't my Worx WorxSaw WX523L Saw blade cut a straight line?
If your Worx Saw blade won't cut a straight line, it might be due to a dull blade. Try mounting a new, sharp blade. Also, ensure you are guiding the saw properly, and consider using a parallel guide.
How to fix a spinning or slipping blade on a Worx WorxSaw WX523L?
If the Worx Saw blade spins or slips, it could be that the blade is not tightly engaged with the spindle. Remove the blade, and then reassemble it properly.
Why is the cutting depth less than set on my Worx WorxSaw WX523L?
If the cutting depth of your Worx Saw is less than what is set, it may be due to sawdust accumulated at the rear of the base. Shake out the sawdust or consider connecting a vacuum for dust collection.
Guidelines for maintaining a safe and clear workspace to prevent accidents.
Precautions to prevent electric shock when operating power tools.
Measures to ensure operator's well-being, including alertness and PPE.
Instructions for proper operation, maintenance, and storage of power tools.
Use only manufacturer-specified chargers for battery packs to avoid fire risk.
Use only designated battery packs to prevent injury and fire hazards.
Keep battery terminals away from metal objects to prevent short-circuiting.
Critical safety instructions specific to all saw operations.
Additional safety recommendations, including kickback prevention.
Ensuring proper guard function for plunge type saw safety.
Maintaining base plate stability during plunge cuts to prevent binding.
Use only designated diamond cut-off wheels and ensure correct speed rating.
Warnings regarding fire, chemical burns, and proper disposal of battery packs.
Procedure for safely removing the battery from the tool.
Instructions on how to properly charge the battery pack.
Steps for securely installing the battery into the tool.
Guidance on how to assemble and remove the saw blade.
Explanation of the safety features of the on/off switch.
Techniques for making cross and rip cuts with the saw.
How to adjust the cutting depth of the saw blade.
Instructions for using the parallel guide for accurate cuts.
Guidance on performing pocket cuts with the circular saw.
Methods for effectively removing sawdust during operation.
To Next Page
General
