What to do if my Worx Saw suddenly stops?
If your Worx Saw suddenly stops during operation, immediately reduce the load on the saw. Let the tool cool down for about 30 seconds by running it without any load. Also, ensure that the battery pack is fully charged.
General| Product color | Black, Orange |
|---|---|
| Built-in light | - |
| Adjustable speed | Yes |
| Number of blades | 1 |
| Included saw blade type | Metal saw blade |
| Number of batteries included | 1 pc(s) |
| Idle stroke rate (max) | 3000 spm |
| Idle stroke rate (min) | 0 spm |
| Input power | - W |
| Power source | Battery |
| Charging time | 60 min |
| Battery voltage | 20 V |
| Battery capacity | 2 Ah |
| Battery level indicator | No |
Weight and Dimensions| Depth | 165 mm |
|---|---|
| Width | 257 mm |
| Height | 127 mm |
| Weight | 1900 g |
Safety precautions for the work environment, including cleanliness, lighting, and preventing ignition sources.
Guidelines for safe electrical connection and usage of the power tool, emphasizing avoiding water and damaged cords.
Precautions for user alertness, protective equipment, preventing accidental starts, and proper attire.
Instructions on correct tool application, maintenance, storage, and handling for safe operation.
Proper procedures for charging, using, and storing battery packs to prevent hazards like fire or leakage.
Specific safety advice for operating the saw in reciprocating mode, focusing on workpiece securing and handling.
Comprehensive safety guidelines for handling, charging, and disposing of battery packs to avoid damage or injury.
Procedure for safely detaching the battery pack from the tool.
Steps for connecting the battery to the charger and initiating the charging process.
Procedure for correctly attaching the battery pack to the power tool.
Guidance on switching between jigsaw and reciprocating saw modes.
Instructions on how to safely remove and install saw blades for different modes.
How to operate the power tool's On/Off switch and safety features.
Explanation of how to use and adjust the pendulum action for different cutting speeds.
Critical safety advice during cutting, including blade handling and workpiece securing.
Information on the function and use of the tool's integrated LED work light.
Practical tips for improving cut quality and preventing motor overheating during operation.
Guidance on cleaning, storage, and general upkeep of the power tool.
Instructions for responsible disposal of waste electrical products and battery packs.
Recommended ambient temperatures for using and charging the tool and battery.
Statement of compliance with EU directives and relevant harmonized standards for the product.
Statement of compliance with UK regulations and relevant standards for the product.
To Next Page
