people or their property.
2. Preparation
a) Before use, check the
supply and extension cord
for signs of damage or
aging. If the cord becomes
damaged during use,
disconnect the cord from
the supply immediately.
DO NOT TOUCH THE CORD
BEFORE DISCONNECTING
THE SUPPLY. Do not use
the appliance if the cord is
damaged or worn.
b) Never operate the machine
while people, especially
children, or pets are nearby.
c) Wear eye protection and
stout shoes at all times while
operating the machine.
3. Operation
a) Keep supply and extension
cords away from cutting
means.
b) Use the machine only in
daylight or good artificial
light.
c) Never operate the machine
with damaged guards or
shields or without guards or
shields in place.
d) Switch on the motor only
when the hands and feet
are away from the cutting
means.
e) Always disconnect the
machine from the power
supply (i.e. remove the plug
from the mains or remove
the disabling device)
– whenever leaving the
machine unattended;
– before clearing a blockage;
– before checking, cleaning or
working on the machine;
– after striking a foreign object;
– whenever the machine starts
vibrating abnormally.
f) Take care against injury to
feet and hands from the
cutting means.
g) Always ensure that the
ventilation openings are kept
clear of debris.
4. Maintenance and storage
a) Disconnect the machine
from the power supply
(i.e. remove the plug from
the mains or remove the
disabling device) before
carrying out maintenance or
cleaning work.
b) Use only the manufacturer’s
recommended replacement
parts and accessories.
c) Inspect and maintain the
machine regularly. Have the
machine repaired only by an
authorized repairer.
d) When not in use, store the
machine out of the reach of
children.
5. Recommendation
a) The appliance should be