Need help?Do you have a question about the Worx WG118E and is the answer not in the manual?
General| Product color | Black, Orange, Silver |
|---|---|
| No-load stroke rate | 8900 spm |
| Engine power | 550 W |
| Power source | Electric AC |
| Battery voltage | 18 V |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Type | String trimmer |
| Head type | Nylon line |
| Telescopic | Yes |
| Handle type | - |
| Line diameter | 1.65 mm |
| Blade material | Nylon |
| Rotational speed | 8900 RPM |
| Sound power level | 96 dB |
| Vibration emission | 5.7 m/s² |
| Line length supplied | 10 m |
| Sound pressure level | 85 dB |
| Cutting diameter (max) | 300 mm |
Weight and Dimensions| Weight | 2800 g |
|---|
Save these instructions for later use to ensure safe operation.
Specific safety instructions for operating the lawn trimmer.
Check supply and extension cords for damage and keep them away from cutting elements.
Ensure proper use by qualified users and keep bystanders away from the operating area.
Use in daylight, with guards, switch on correctly, and avoid metal cutting elements.
Disconnect before maintenance, inspect regularly, and store out of children's reach.
Explanation of symbols like read instructions, double insulation, eye protection, and warnings.
Symbols indicating moisture caution, keeping bystanders away, cord disconnection, and RCM approval.
Symbols representing Edging and Trimming modes.
Disconnect after use, check for damage, and store out of reach of children.
Only authorized repairers should service the trimmer; use recommended parts and accessories.
Steps for removing the screw and fitting the safety guard to the trimmer head.
Instructions for attaching the edger wheel assembly to the trimmer head.
Warning about rotating head after switch-off and importance of eye protection.
Proper grip, body posture, and working direction for safe trimming and edging.
Ensure lines are extended and motor runs at full speed; use specified line diameter.
Instructions on when to push in or pull out the spacer guard for trimming or edging.
Adjusting telescopic shaft length and auxiliary handle position for comfort.
Using the on/off trigger and adjusting the trimmer head angle for different tasks.
Proper techniques for trimming grass and edging lawns using the tool.
Manual line feeding, spool replacement, and winding procedures.
To Next Page
