Worx WG118E - Shaft and Handle Adjustments

8
2-in-1 Grass Trimmer/Edger WG118E
2. ADJUSTMENT OF THE TELESCOPIC SHAFT
(See Fig. D)
Unscrew the Locking Collar (3) clockwise to unlock, as
indicated. Adjust the length of the Telescopic Shaft (6)to
the most comfortable length. Tighten the Locking Collar
counter-clockwise to lock, as indicated.
3. MAIN HANDLE ROTATION
First, hold down the lower housing with your foot and
pull upward on the Telescopic Shaft (6). Then rotate
the Telescopic Shaft clockwise 90 degrees (See Fig.
E1) and release; the Shaft will be locked in position
automatically (See Fig. E2).
4. ADJUSTING THE AUXILIARY HANDLE
(See Fig. F)
Pull up the Auxiliary Handle Locking Lever (10).
Hold the lever and rotate the Auxiliary Handle (7) to the
most comfortable and balanced position (See Fig. F).
Release the lever, your Auxiliary Handle has been
locked.
b
a
A
B
C
D
E1
E2
F
G
H1
16
H2
I
J
15
11
12
13
14
K
L1
L2
L3
L4
RIGHT
WRONG
b
a
A
B
C
D
E1
E2
F
G
H1
16
H2
I
J
15
11
12
13
14
K
L1
L2
L3
L4
RIGHT
WRONG