Worx WG118E User Manual

3
2-in-1 Grass Trimmer/Edger WG118E
22. Take care against injury from any device
fitted for trimming the filament line length.
After extending new cutter line always
return the machine to its normal operating
position before switching on;
23. Never fit metal cutting elements;
24. Always ensure that ventilation openings
are kept clear of debris.
MAINTENANCE
a) After use, disconnect the machine from the
mains and check for damage;
b) When not in use store the machine out of
the reach of children;
c) Mains powered trimmers should only be
repaired by an authorised repairer;
d) Use only manufacturers recommended
replacement parts and accessories.
WARNINGS:
- WARNING: Cutting elements continue to
rotate after the motor is switched off,
- Keep extension cords away from cutting
elements;
It is recommended that appliances should be
supplied via a residual current device (RCD)
with a tripping current of not more than 30mA.
SYMBOLS
Read instruction sheet
Double insulation
Wear eye protection
Do not expose to moisture.
Keep bystanders away.
Disconnect the mains plug if the
cord is damaged or entangled.
RCM approval mark
Edging
Trimming

Worx WG118E Specifications

General

Product color	Black, Orange, Silver
No-load stroke rate	8900 spm
Engine power	550 W
Power source	Electric AC
Battery voltage	18 V
AC input voltage	220 - 240 V
AC input frequency	50 / 60 Hz
Type	String trimmer
Head type	Nylon line
Telescopic	Yes
Handle type	-
Line diameter	1.65 mm
Blade material	Nylon
Rotational speed	8900 RPM
Sound power level	96 dB
Vibration emission	5.7 m/s²
Line length supplied	10 m
Sound pressure level	85 dB
Cutting diameter (max)	300 mm

Weight and Dimensions

Weight	2800 g